Shop

Pick Up Pattern Omni-Directional Frequency Range 50HZ~20KHZ Sensitivity -40±2dB Signal to Noise Ratio ≥67dB SPL ≥110dB

Size: 4" x 11,8" x 11,8" (10cm x 30cm x 30 cm) Weight: 3 lbs (1,9 kg) Material: 24mm birch/pine plywood

12 Unique RGB Colors and Effects Broadcast Quality Large Dynamic Microphone Diaphragm Robust Metal Body with a Floating Friction Pivot 20Hz – 20kHz Frequency Range 135dB Max SPL 24-Bit/48kHz USB-C Interface / No Drivers Needed Hardware Analog Limiter Built-In To Prevent Audio Clipping Headphone...

- Solid cage-to-camera attachment (side&bottom)- 1/4" mounting points- 3/8" threaded openings with Arri locating points- M4 mounting points- Full access to camera features- Strap holder- Aluminum made

Key features: Universal (for monitors up to 7") 1/4" mounting points Adjustable foam handles Rubber padass Battery plate with M3 mounting points

Size: 2" x 11,8" x 11,8" (5cm x 30cm x 30cm) Weight: 3 lbs (1,35 kg) Material: 24mm birch/pine plywood 

Buy our products, and customize them with your logo.

Compact design 20mph Wind Rating Automatic extra track assignment when a secondary source is plugged in (Right Channel) No Batteries Required – runs off 1-5V from cameras, phones, and audio recorders

1 x 8Sinn VCT Universal Shoulder Base Plate2 x 8Sinn Side Arm for Shoulder Rigs2 x 8Sinn Dual Side Grip+ free set of 15MM Carbon Fiber Rods (choose the length in the drop-down menu)

Buy our products, and customize them with your logo.

Lightweight and Ultra Compact Locking 3.5mm Mic Input Up to 175ft Range* Guard Rail™ Analog Limiter Simple Pairing USB-C Output for Digital and Analog Devices ~1″ OLED display 24bit/48KHz +5hrs of Battery Life

Key features: Arri locating points Threaded openings - 1/4" 2 poinst of cage-to-camera attachment (2x bottom 1/4") Full access to camera features Clean-cut ergonomic design Aluminum made and Lightweight

Key features: 1/4" mounting points (on top & both sides) Arri locating point (3/8" mounting point on top) Anti-twist M2.5 screw fixed to the Eyelet attachment Strap holder M4 threads (top front, bottom front) Easy access Lightweight build

Level your camera when using a slider on an angle. Record unique shots with manually or motion-controlled sliders Adjustable tilt angle up to 180° with angle markings from 0-90° Max payload of 6kg with adjustable tension Standard 3/8-16'' & 1/4-20'' UNC thread mounting options

366x366 cm Overhead Frame Set  Carrying Bag Basic Set of rags

Key features: M12 Female threads on both ends Available lenghts: 10, 15, 20, 25, 30cm Aluminum made

Essential accessory for everyday use. Lens' are just as, or if not more, important than the camera itself. So when setting up your rig, don't forget to support the lens.

Key features:- 1/4” mounting points- 3/8” mounting points with Arri locating pins- M4 mounting points- Cold shoe mount- Strap holder- Aluminum made- Lightweight construction

Essential accessory for everyday use.

Key features: Ergonomic Walnut wood Attachment: 32mm Arri Rosette Toolless monting (thumbscrew) Left side compatible

Panning motion control with Keyframing for video and time-lapsePanorama and Turntable modesFull iOS and Android App control via BluetoothBattery life: 6hrs video and 15hrs time-lapsePanning payload 8.8lbs/4kgs

Essential accessory for everyday use.

Key features: Pre-assembled three-piece half cage Solid cage-to-camera attachment (1x top & 2 x bottom 1/4 “ mounting screws) 3/8” Arri locating points 1/4" threaded openings Strap holder Cold shoe

Key features: Solid cage-to-camera attachment Arri locating points (+ 3/8" mounting point) 1/4" mounting points 3-piece cage Aluminum made

Key features: Arri locating points (+ 3/8" mounting point) 8 x 1/4" mounting threads 4 x M4 mounting threads 2 points of plate-to-camera attachment Aluminum made

Key features: 2 points of support-to-cage attachment 2 points of support-to-adapter attachment Aluminum made Lightweight

Set includes: 8Sinn Cage for Red Komodo + Top Plate 8Sinn Black Raven Top Handle 8Sinn 15mm Baseplate 8Sinn Riser Plate I 8Sinn 10" Arri Dovetail Plate (rods not included)

Key features: 0,005mm accuracy Infinity focusing Aluminum alloy Black anodized Made in UE Weight (without PL cap) - only 160g / 5.6 oz

Key features: 1/4" threaded openings Built-in NATO rails HDMI protective clamp 4 points of monitor-to-cage attachment 3/8" to 1/4" reduction screw Easy access to all sockets One piece of aluminum Strap holder

Key features: Stainless steel PL mount flange 0,005mm accuracy Infinity focusing Aluminum alloy and stainless steel Black/silver anodized Weight ( without PL cap) - 376 g / 13.3 oz

Key features: 1/4" threaded openings Built-in NATO rails HDMI protective clamp 2 points of monitor-to-cage attachment 3/8" to 1/4" reduction screw Easy access to all sockets One piece of aluminum Strap holder

Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light. 

Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light. 

Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light.

- Compatibility with Sony FX3 and FX30- Aluminum made- 2 points of support-to-cage attachment- 1 point of support-to-adapter attachment

Black solid flag (Cutter) for light control purposes, Used to control natural or artificial light, The smallest useful Cutter Size from Udengo 

Key features:- Compatibility with Sony FX3 and FX30- 15mm rod standard- Integrated Cold Shoe- Secure mount prevents deviation (2x1/4")- Aluminum made- Lightweight

366x366cm Overhead Frame Set

Key features: 1/4" mounting screw 180° tilt adjustment Tool-free Rubber pads Aluminum made

Key features: Fabric + plastic insert Detachable Foldable Attachment: velcro straps